Insert a SIM card and battery
Note: Switch the device off and disconnect the charger and any other device before
removing any covers. Avoid touching electronic components while changing any covers.
Always store and use the device with any covers attached.
Important: This device is designed to be used with a standard SIM card (see figure)
only. Use of incompatible SIM cards may damage the card or the device, and may corrupt
data stored on the card. Please consult your mobile operator for the use of a SIM card
that has a mini-UICC cutout.
Important: To prevent damage to the SIM card, always remove the battery before
you insert or remove the card.
This phone is intended for use with a BL-5C battery. Always use original Nokia batteries.
If you only have one SIM card, insert the card into the internal SIM card holder.
The SIM card and its contacts can be easily damaged by scratches or bending, so be
careful when handling, inserting, or removing the card.
1 Place your finger in the recess at the top of the phone, and carefully lift and remove
the back cover (1). If the battery is inserted, lift it out (2).
2 Open the SIM card holder (3), and insert or remove the SIM card (4 or 5). Make sure
the contact area of the card is facing down.
3 Line up the contacts of the battery and the battery compartment, and insert the
battery (6). To replace the back cover, direct the bottom locking catches toward
their slots (7), and press down until the cover locks into place (8).